AS 5101.4:2008
$27.30
Methods for preparation and testing of stabilized materials – Unconfined compressive strength of compacted materials
| Published By | Publication Date | Number of Pages |
| AS | 2008-06-19 | 13 |
This Standard sets out the method for determining the unconfined compressive strength of compacted specimens of unbound, bound and self-cementing materials.
This method is applicable to the control testing of field or plant mix materials and for the assessment of the strength of materials mixed in the laboratory.
The test is conducted on that portion of the material that passes the 19.0 mm sieve.
NOTE: The exclusion of a large proportion of stone coarser than 19.0 mm may have a major effect on the unconfined compressive strength determined compared with that obtainable with the material as a whole.
Related products
-
ISO 10144:2018
Steels for the reinforcement and prestressing of concrete — Certification scheme for steel bars and…
-
AS 1101.1:2007
Graphic symbols for general engineering – Hydraulic and pneumatic systems Published By Publication Date Number…
-
ICAO 10114:2018
Legal Committee 37th Session Montréal, 4-7 September 2018 – Report Published By Publication Date Number…
-
AS 2001.4.E04:2005 (R2016)
Methods of test for textiles – Colourfastness tests – Determination of colourfastness to perspiration Published…
-
AS 1121.4:2007
Agricultural tractor power take-offs – Guards for power take-off (PTO) drive-shafts – Strength and wear…
-
AS 2001.4.E01:2001 (R2016)
Methods of test for textiles – Colourfastness tests – Colourfastness to water Published By Publication…
-
BS EN 50164-3:2006+A1:2009:2010 Edition
Lightning protection components (LPC) – Requirements for isolating spark gaps Published By Publication Date Number…
-
AS 2001.4.B01:2005 (R2016)
Methods of test for textiles – Colourfastness tests – Determination of colourfastness to daylight of…
-
ASME B107.4 2005 R2011
ASME B107.4 – 2005: Driving and Spindle Ends for Portable Hand, Impact, Air and Electric…
-
AS IEC 61014:2004 (R2016)
Programmes for reliability growth Published By Publication Date Number of Pages AS 2004-04-01 53
-
AS 5100.1 Supp 1:2006
Bridge design – Scope and general principles – Commentary (Supplement to AS 5100.1-2004) Published By…
-
AS 5100.4 Supp 1:2006
Bridge design – Bearings and deck joints – Commentary (Supplement to AS 5100.4-2004) Published By…
-
AS 1101.3:2005 (R2018)
Graphical symbols for general engineering – Welding and non-destructive examination Published By Publication Date Number…
-
IEC 61014:2003
Programmes for reliability growth Published By Publication Date Number of Pages IEC 2003-07-21 96
-
AS 2001.4.E02:2001 (R2016)
Methods of test for textiles – Colourfastness tests – Colourfastness to sea water Published By…
-
ISO 21014:2006
Cryogenic vessels — Cryogenic insulation performance Published By Publication Date Number of Pages ISO 2006-08…
-
ISO 10134:2003
Small craft — Electrical devices — Lightning-protection systems Published By Publication Date Number of Pages…
-
AS 2001.4.A03:2005 (R2016)
Methods of test for textiles – Colourfastness tests – Grey scale for assessing staining Published…
-
AS 5100.2 Supp 1:2007
Bridge design – Design loads – Commentary (Supplement to AS 5100.2 – 2004) Published By…
-
AS 1141.4:2000 (R2013)
Methods for sampling and testing aggregates – Bulk density of aggregate Published By Publication Date…
-
ISO 15014:2007
Plastiques — Plaques extrudées en poly(fluorure de vinylidène) (PVDF) — Exigences et méthodes d’essai Published…
-
AS 5102.2:2009
Performance of household electrical appliances – Swimming pool pump-units – Energy labelling and minimum energy…
-
AS 2001.4.A01:2004 (R2016)
Methods of test for textiles – Colourfastness tests – General principles of testing (ISO 105-A01:1994,…
-
AS 5101.5:2008 (R2017)
Methods for preparation and testing of stabilized materials – Absorption, swell and capillary rise of…
-
BS EN 50164-2:2008
Lightning protection components (LPC) – Requirements for conductors and earth electrodes Published By Publication Date…
-
AS 5100.5 Supp 1:2008
Bridge design – Concrete – Commentary (Supplement to AS 5100.5 – 2004) Published By Publication…
-
AS 5100.7 Supp 1:2006
Bridge design – Rating of existing bridges – Commentary (Supplement to AS 5100.7-2004) Published By…
-
AS 2001.4.A05:2004 (R2016)
Method of test for textiles – Colourfastness tests – Instrumental assessment of the change in…
-
AS 2001.4.A04:2004 (R2016)
Methods of test for textiles – Colourfastness tests – Instrumental assessment of the degree of…
-
AS 5013.4:2009
Food microbiology – Microbiology of food and animal feeding stuffs – Horizontal method for the…
-
BS EN 10154:2002
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions Published By Publication…
-
ISO 10104:2001
Assembly tools for screws and nuts — Double-headed, deep offset and modified offset, box wrenches…
-
AS 5100.3 Supp 1:2008
Bridge design – Foundations and soil-supporting structures – Commentary (Supplement to AS 5100.3-2004) Published By…
-
ISO 10104:2018
Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset…
-
AS 5100.6 Supp 1:2007
Bridge design – Steel and composite construction – Commentary (Supplement to AS 5100.6 – 2004)…
-
AS 2106.4:2005 (R2016)
Methods for the determination of the flash point of flammable liquids (closed cup) – Determination…
-
AS 2001.4.A02:2005 (R2016)
Methods of test for textiles – Colourfastness tests – Grey scale for assessing change in…
-
BS EN 50124-1:2001+A2:2005:2010 Edition
Railway applications. Insulation coordination – Basic requirements. Clearances and creepage distances for all electrical and…
-
AS 2001.4.B02:2001 (R2016)
Methods of test for textiles – Colourfastness tests – Colourfastness to artificial light: Xenon arc…
-
ISO 11014:2009
Safety data sheet for chemical products — Content and order of sections Published By Publication…
