AS 3011.2:2019
$27.30
Electrical installations – Secondary batteries installed in buildings – Sealed cells
| Published By | Publication Date | Number of Pages |
| AS | 2019-12-20 | 19 |
The objective of this Standard is to set out minimum requirements for the installation of sealed secondary batteries to ensure safety from fire and electric shock.
Scope
This Standard sets out requirements for the installation of sealed lead-acid and sealed alkaline secondary batteries with a nominal voltage exceeding 24 V d.c. and a capacity exceeding 10 A.h at the 1 h rate of discharge, permanently installed in buildings, structures or premises. This Standard applies to premises with critical power continuity requirements, for example acute care hospitals, sub-station support and black start.
NOTE 1 Refer to AS 2676.2 for guidance on the installation and maintenance of sealed secondary batteries.
NOTE 2 This Standard applies to sealed cells only. Refer to AS 3011.1 and AS 2676.1 for the installation and maintenance of vented cells.
NOTE 3 Refer to AS/NZS 3015 for requirements specifically applicable to the design and installation of extra-low voltage (d.c.) power supplies that are used by telecommunications carriers in the provision of public telecommunications networks.
NOTE 4 Refer to AS 5139 for general installation and safety requirements for battery energy storage systems (BESSs).
Related products
-
IEEE 3001.2-2017
IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems…
-
NACE 01102-2018
State-of-the-Art Report: Criteria for Cathodic Protection of Prestressed Concrete Structures Published By Publication Date Number…
-
AS 1012.2:2014
Methods of testing concrete – Preparing concrete mixes in the laboratory Published By Publication Date…
-
AS 3711.4:2015
Freight containers – General purpose containers (ISO 1496-1:2013, MOD) Published By Publication Date Number of…
-
IEEE 3006.2 2016
IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems Published…
-
AS 3711.5:2015
Freight containers – Thermal containers (ISO 1496-2:2008, MOD) Published By Publication Date Number of Pages…
-
IEEE 3002.2 2018
IEEE Recommended Practice for Conducting Load-Flow Studies and Analysis of Industrial and Commercial Power Systems…
-
IEEE 3001.8 2013
IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems Published…
-
BS ISO 30012:2016+A1:2018
Carbon-fibre-reinforced plastics. Determination of the size and aspect ratio of crushed objects Published By Publication…
-
AS/NZS 4011.2:2014
Single-use medical examination gloves – Specification for gloves made from poly(vinyl chloride) (ISO 11193-2:2006, MOD)…
-
AS/NZS 3004.2:2014
Electrical installations – Marinas and boats – Boat installations Published By Publication Date Number of…
-
AS 3711.2:2015
Freight containers – Terminology (ISO 830:1999, MOD) Published By Publication Date Number of Pages AS…
-
AS 3711.1:2015
Freight containers – Classification, dimensions and ratings (ISO 668:2013, MOD) Published By Publication Date Number…
-
AS 3515.2:2019
Gold and gold bearing alloys – Determination of gold content (30 % to 99.5 %)…
-
AS 3711.3:2015
Freight containers – Corner fittings (ISO 1161:1984, MOD) Published By Publication Date Number of Pages…
-
IEEE 3001.5 2014
IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power…
-
AS/NZS 4014.2:2016
Domestic solid fuel burning appliances – Test fuels – Softwood Published By Publication Date Number…
-
AS 3818.2:2010
Timber – Heavy structural products – Visually graded – Railway track timbers Published By Publication…
-
AS 3571.2:2009
Plastics piping systems – Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin –…
-
ISO/IEC 30111:2019
Technologies de l’information — Techniques de sécurité — Processus de traitement de la vulnérabilité Published…
-
AS 4001.2:2017
Vehicles – Rear marker plates – Reflective rear marker plates – Fitting requirements Published By…
-
IEEE 3001.5-2013
IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power…
-
IEEE 3006.2-2016
IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems Published…
-
AS 3011.1:2019
Electrical installations – Secondary batteries installed in buildings – Vented cells Published By Publication Date…
-
AS/NZS 4011.1:2014
Single-use medical examination gloves – Specification for gloves made from rubber latex or rubber solution…
-
IEEE 3001.2 2017:2018 Edition
IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems…
-
IEEE 3007.2 2010
IEEE Recommended Practice for the Maintenance of Industrial and Commercial Power Systems Published By Publication…
-
IEEE 3001.8-2013
IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems Published…
-
AS/NZS 3012:2019
Electrical installations – Construction and demolition sites Published By Publication Date Number of Pages AS…
-
TIA-2001.2-E:2010
Interoperability Specification (IOS) for cdma2000 Access Network Interfaces – Part 2: Transport Published By Publication…
-
ISO 30012:2016
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects Published By…
-
IEEE 1711.2-2019
IEEE Standard for Secure SCADA Communications Protocol (SSCP) Published By Publication Date Number of Pages…
-
AS ISO/IEC 30105.2:2017
Information technology – IT Enabled Services – Business Process Outsourcing (ITES-BPO) lifecycle processes-Process assessment model…
-
AS/NZS 2041.2:2011
Buried corrugated metal structures – Installation Published By Publication Date Number of Pages AS 2011-04-04…
-
ISO 30012:2016/Amd 1:2018
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment…
-
AS/NZS ISO 10161.2:2015
Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification – Protocol…
-
IEEE 3003.2-2014
IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems Published…
-
IEEE 3003.2 2014
IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems Published…
-
AS 3891.2:2018
Air navigation – Cables and their supporting structures – Marking and safety requirements – Low…
-
AS 1111.2:2015
ISO metric hexagon bolts and screws – Product grade C – Screws Published By Publication…
